Blog

HP HEATING PROBLEMS

HP HEATING PROBLEMS If HP devices, especially the models with the fan ventilation at the bottom, are used on soft surfaces, they immediately become clogged and prevent the air flow, in fact, the devices that have no problems at all, cannot throw the hot air inside out and turn off.

Shutting down is also a good thing because if a device does not shut down when it gets hot, it will burn out one of the graphics card or processor.

HP WARMING PROBLEMS and Solutions

The computer’s warming up and shutting down is actually a kind of defense and prevention system for future damage. In fact, some devices cannot be turned on again until they cool down.

HP HEATING PROBLEMS What Causes the ?

HP HEATING PROBLEMS

HP HEATING PROBLEMS

Hp computers are generally the laptop computers that have the most heating problem. In hp pavilion models with hp laptop fan grilles at the bottom, overheating and shutdowns due to heating occur when they do not get air from the fan grills depending on the region where it is positioned.

Hp heating problem may be caused by the place you use if the fan is clean. In general, you may experience a closing problem because the ventilation section on the mattress, that is, on soft surfaces, is closed, and it cannot vent enough hot air. It can be understood from the working sound of the computer. Fan noise will increase.

HP HEATING PROBLEMS How to Solve

Hp Heating problems are caused by the surface you are using and if you are sure that your device is clean, it is either caused by thermal paste or not working at full performance due to fan failure.

This is a very common situation. Due to the fact that the processor fan blades are also cracked or broken, there may be noises such as clicking and constantly heating and closing.

If everything is solid and clean and it still gets hot and shuts down, it is definitely due to the usage surfaces that prevent it from getting comfortable air. For similar problems, you can check our blog page. HP Service

If we give you advice for the solution of this;

You can use it on a work desk, even laptop coolers that work from USB can be used under it.

If you place your laptop on this product and connect the usb cable, the fans in the product provide cooling support from the bottom and if you use it on surfaces such as beds, it will prevent airflow from being blocked.

If the fan is faulty or cracked/broken, it should be replaced by providing a fan suitable for the brand and model of your computer.

With the fan change, after the fan is changed in our HP Service Center, the thermal paste is refreshed and the machine oil is sprayed on the fan motor to facilitate its rotation and dust cleaning is done.

After these processes, your computer will breathe a sigh of relief and will not overheat.

Leave a Reply

E-posta hesabınız yayımlanmayacak.